15
14
NAMES OF PARTS - CONT'D
NAMES OF PARTS - CONT'D
Close-framing guide
When you shoot a subject which is closer than 1m through the viewfinder, only the part under the
close-framing guide is recorded. So, use the LCD monitor to check the image composition when you
shoot a subject which is closer than 1m.
VIEWFINDER
Focus Iamp
(green)
Flash Iamp
(orange)
Close-framing guide
Focus Lamp (Green)
Lights.
The focus is determined and locked.
Blinks quickly (about 8
times in a second).
The focus is not determined.
(The subject contrast is too low, the subject is too dark or too close.
Or the subject is too far in the close up mode.)
Blinks slowly (about 2
times in a second).
The image is being recorded in the CF (Compact Flash) card.
The camera reads out the image from the CF card.
Focus Area (as a Guide)
Flash Lamp (Orange)
In the autofocus mode,
the focus is adjusted at
the gray part as shown
in the figure.
Lights.
The flash ready for fires.
Blinks quickly when the shutter-release
button is pressed all-the-way down
(about 8 times in a second).
(When the flash function is cancelled)
Blinks slowly (about 2 times in a second).
The flash is being charged.
The shutter-release button is not released.
The shutter speed becomes slow.
Taking a picture in this mode may cause
an image blurred.
Содержание 4100Z3
Страница 1: ......
Страница 6: ...11 10 NAMES OF PARTS NAMES OF PARTS CAMERA BODY Do not touch...