JCM TSP-01, Инструкция по эксплуатации

Страница: 9 / 26

4.
Paper Curl
The deformation (curl and warp) of papers used for TSP-01 printers is limited as follows.
Deformation to be measured after paper has been stabilized for a minimum of 48 hours
at 20 ± 5
o
C, 55 ± 15% RH.
5.
Thermal side printing
5.1 Ticket shall have the text: “INSERT THIS SIDE UP” preprinted in heat resistant
black ink along the 65 mm edge as show in Figure 1. Font size shall be 12 pt.
5.2 Lot code, date code or other information identifying the printing date or batch number
shall be printed in heat resistant black ink along one of the 65 mm edges as shown in
Figure 1. An arrow or other symbol indicating paper grain orientation shall also be
included. Font size shall be 4 pt.
5.3 No other preprinting is allowed on the thermal side without prior approval of JCM
American Corp.
6. Non-thermal side printing
6.1 The non-thermal side may be preprinted with multi colored graphic images. All
printing on the non-thermal side must be within the area shown in Figure 2.
POSITIVE WARP
ZERO ALLOWED
THERMAL SIDE UP
NEGATIVE WARP
5MM TOTAL MAX.
5MM PER 156MM IS
.032INCHES/INCH
POSITIVE CURL
ZERO ALLOWED
THERMAL SIDE UP
NEGATIVE CURL
5MM TOTAL MAX.
5MM PER 67MM IS
.075INCHES/INCH
7