JCM TSP-01, Инструкция по эксплуатации

Страница: 7 / 26

Dip Switch Settings
Dip Switches
OFF
4 3 2 1
OFF
4 3 2 1
OFF
4 3 2 1
OFF
4 3 2 1
OFF
4 3 2 1
Normal Operating Setting - This is the default setting for
normal communication via the host application.
Dip Switch #1:
Off = Barcode check
On = No barcode check
Others are default to OFF position
Coupon Print Test - Will print a ticket and check the barcode. If
there is something wrong with the barcode, VOID will be printed
on the ticket and it will be transported to the reject area.
Print Bar Sensor Signal and Data - A barcode ticket is printed.
The sensor signal and data are printed on the following piece of
paper. This is used to make sure barcode and transparency sen-
sors are adjusted properly.
Print Test pattern and Version Information - Print a test
pattern, model name and version number. This feature is useful
for quickly checking print quality.
Adjust Barcode and Transparency Sensors - To be used when
attempting to use the Sensor Adjustment procedure.
NOTE: Dip switches must be set with the power OFF. W#hen power is turned ON, the operation begins.
5