© 2016, JCM American Corporation
2 - 1
S e c t i o n 2
This section provides installation and preventive
maintenance procedures for the GEN5 Printer. This
section includes:
•
Installation Procedure
•
DIP Switch Configuration
•
Connector Pin Assignments
•
Preventive Maintenance
•
Cleaning Procedure
Installation Procedure
Perform the following steps to install the GEN5
Printer Unit in the Host Machine:
1. Remove AC power from the Host Machine.
2. Identify the location where the GEN5 Printer Unit
is to be installed.
3. Mount the Mounting Rail to the Host Machine
chassis using a minimum of four (4) M4 x 4
screws or a mounting plate with four (4) M4 x 4
studs.
4. Slide the GEN5 Printer onto the Mounting Rail.
5. Connect the Power and Signal Connector to the
GEN5 Printer Unit.
6. Restore AC power to the Host Machine.
DIP Switch Configuration
This section provides the DIP Switch Configuration
Settings for SW1 through SW4 on the GEN5
Printer Unit (Figure 2-1). While Baud Rate settings
are auto-configured by the system’s firmware, auto-
configuration can be overridden by manually set-
ting the DIP Switches to configure baud rate set-
tings on the Printer Unit.
2 INSTALLATION
WARNING: Before performing this
procedure, observe the ESD WARNING
in “User Cautions” on page 1-2.
WARNING: The GEN5 Printer Unit
MUST be mounted to a grounded metal
plate.
Table 2-1
DIP Switch Baud Settings
*
*. DIP Switches SW5 and SW6 are NOT USED.
SW1
SW2
SW3
SW4
Mode (bps
†
)
†. bps = bits per second.
ON
ON
ON
X
9600
ON
ON
OFF
X
9600
ON
OFF
ON
X
19200
OFF
ON
OFF
X
38400 (Default)
OFF
ON
ON
X
57600
OFF
OFF
OFF
X
115200
OFF
OFF
ON
X
307200
ON
OFF
OFF
X
921600
X
X
X
OFF
XON/XOFF (SW)
X
X
X
ON
RTS
NOTE: Baud Rate settings are auto-
configured by the system’s firmware.
Baud settings in Table 2-1 are
provided for reference.
WARNING: DIP Switches SW5 and SW6
are reserved - DO NOT change the
settings on these DIP Switches.
Figure 2-1
DIP Switch and Firmware Update Port
DIP SW1
ON
OFF
1
2
3
4
5
6
Содержание GEN5 Series
Страница 10: ...THIS PAGE INTENTIONALLY LEFT BLANK GEN5 Series Printer P N 960 100940R_Rev A 2016 JCM American Corporation viii...
Страница 62: ...P N 960 100940R_Rev A 2016 JCM American Corporation 8 2 GEN5 Series Printer THIS PAGE INTENTIONALLY LEFT BLANK...
Страница 69: ......
Страница 70: ...GEN5 Series Printer P N 960 100940R_Rev A 2016 JCM American Corporation...