JCM G-456E Скачать руководство пользователя

Страница: 1 / 191

PREFACE

Thank you for purchasing this ECR. Please read this manual carefully before operating your ECR

and keep it at hand for future reference. We hope it will be helpful to you if you encounter any

operational problem.

The information in this manual is subject to change without notification. Further pages may be

added to future editions. The user is asked to excuse any omissions or error in the present edition.

No liability will be assumed for any changes, omissions, or error, in this manual, or for any accidents

that occur while the use is following the instructions in it.

No liability will be assumed for defects in the ECR's firmware.

BEFORE OPERATION THE ECR

General Precautions

A) The shock of impact can damage the ECR. Install the ECR on a stable and level place.

B) Do not move the ECR with the power ON.

C) Be careful not to spill liquids on the ECR, or drop metallic objects such as paper clips

into it.

D) To clean the ECR, wipe it with a soft, dry cloth. Do not use solvents such as thinner,

lcohol or benzene.

E) If you leave the ECR unused for a long time, unplug the power cord.

Choosing a Location for the ECR

Avoid location where the ECR would be exposed:

A) Excessive dust

B) Vibration

C) High humidity

D) Extremely high or low temperature rapid changes in temperature

E) Direct sunlight

F) Direct heat from a heating appliance

NOTICE

FOR PLUGGED EQUIPMENT, THAT THE SOCKET OUTLET SHALL BE INSTALLED NEAR

THE EQUIPMENT AND SHOULD BE EASILY ACCESSIBLE.

CAUTION

Do not use this ECR outdoors in the rain or near any source of liquid.

G-556 series ECR include the models of G-456E, G-556E and G-3000R, so the manual is used

for these ECR models.

Содержание G-456E
































































































































































































Результаты поиска

Содержание G-456E

Отзывы:

Похожие инструкции для G-456E

Бренды по названию

Популярные бренды

JCM G-456E, Руководство пользователя

Результаты поиска

Содержание G-456E

Отзывы:

Похожие инструкции для G-456E

Бренды по названию

Популярные бренды