jcm-tech RADIOBAND3G, Руководство пользователя

Страница: 21 / 28

CHECK function
Ideal to know the radio coverage of the installation.
Press the receiver’s CHECK button for at least 1 second to enter check mode. The
indicator light will come on and four beeps will be heard.
Perform a complete door opening and closing manoeuvre. During the system check
a beep will be heard every 1,5 seconds. If you have not heard any other acoustic sig-
nal at the end of the manoeuvre, the system works properly. If during the verification,
the communication with a transmitter fails or the communication is poor, the receiver
emits three consecutive beeps indicating that an error occurred.
Press all the safety edges installed to detect which one has failed.
Low signal coverage increases battery consumption.
To exit Check mode, press the CHECK button or wait 5 minutes. On exiting check
mode, seven consecutive beeps will be heard and the indicator light will flash con-
tinuously in case of failure.
It is recommended to perform a CHECK function at the end of the installation process
to ensure a proper system operation.
jcm technologies
21