jcm-tech RADIOBAND3G, Руководство пользователя

Страница: 16 / 28

Mode 1: Safety edge connected to IN1 activates R1
Safety edge connected in IN1 will activate R1.
Employed receiver memory = 1 transmitter
Programming sequence:
• Press PROG button on the receiver (1) until R1 LED lights (2).
• Press PROG button on the transmitter (3).
• A beep will be heard on the receiver indicating the transmitter is properly pro-
grammed (4).
• To exit programming mode, wait for 20 seconds or press PROG button on the
receiver. Two beeps will be heard.
jcm technologies
16