jcm-tech RADIOBAND3G, Руководство пользователя

Страница: 19 / 28

Mode 4: Safety edge connected to IN1 activates R1
and safety edge connected to IN2 activates R2
Safety edge connected in IN1 will activate R1 and IN2 will activate R2.
Employed receiver memory = 2 transmitters
Programming sequence:
• Press PROG button on the receiver (1) until R1 LED and R2 LED flash (2).
• Press PROG button on the transmitter (3).
• A beep will be heard on the receiver indicating the transmitter is properly pro-
grammed (4).
• To exit programming mode, wait for 20 seconds or press PROG button on the
receiver. Two beeps will be heard.
jcm technologies
19