background image

 P/N 960-000175R_Rev. A {EDP #233426}

 © 2014, JAPAN CASH MACHINE CO., LTD.

2

 DBV

®

 Series Banknote Validator (DBV-400) Integration Guide

Model Descriptions

Table 1 lists the product model number 

descriptions.

Type Descriptions

Table 2 lists the product type number descrip-
tions.

Software Descriptions

Table 3 lists the software number descriptions.

Precautions

Symbols in Figure 2 are defined as follows:

1. 

(Type 1)

 Do not insert a torn, folded, or wet 

Banknote; it may cause a jam inside the unit.

2. 

(Type 2)

 Do not expose the unit to water. The unit 

contains several precision electronic devices that 

can be damaged if water or any liquid is sprayed 

or spilled into the unit.

3. 

(Type 3)

 Do not install the unit in a dusty 

environment. Dust may affect/degrade the sen-

sor’s performance.

U

SER

 C

AUTIONS

Careful measures were taken in the design of this 

product to ensure its quality; however, the follow-

ing cautions pertain to all users and should be fol-

lowed for safe operation.

Installation Cautions

The Installation Cautions are defined as follows:

1.  Be sure the Host Machine contains enough 

protection to avoid wet or dusty conditions when 

installing the unit in an indoor or open-air space. 

The unit is not designed for outdoor installations. 

2.  Be sure the Host Machine is designed with 

careful consideration for retrieving a Banknote 

and/or clearing a Banknote jam.

3.  Be careful not to use excessive outside pressure 

on the Mounting Plate when removing the Cash 

Box from the Unit.

Table 1 

DBV-400 Model Number Specifications

N

o

Model: DBV- 4 * * - (*) * *

                     N

o

   

     (1)         (2)(3)   (4)  (5)

(1) Product Series Name

(2)

Validator Sensor

0 = Type A (Standard)

1-9 = Reserved

(3)

Transport Unit

0 = Standard

1-9 = Reserved

(4)

Optional Unit (Banknote Insertion Section)

None = Standard

A-Z = Reserved

(5)

Stacker Type

SU/SD = Downward Stacking/Upward Stacking (Standard)

SH = Reserved

UH = Reserved

Table 2 

DBV-400 Type Number Specifications

N

o

Model: ***(*) - * * * * * - **

                            N

o

     

(1)  (2)(3)(4)(5)(6) (7)

(1)

Cash Box Capacity

*

0 = No Cash Box (Transport Unit Specification)

S = 300 notes (New Banknote)

M = 500 notes (New Banknote)

L= 1000 notes (New Banknote)

*. The numbers of stacked Notes depends on the Banknote’s condition.

(2) 

Cash Box Type

0 = Standard

1 - 9 = Reserved

(3) 

Cash Box Door

0 = Standard

1 - 9 = Reserved

(4) 

Bezel (Option)

0 = JCM Standard Bezel (Standard)

1 = Snack Mask

2 = TOB

3 = Euro 2-Rows SU

4 = Reserved

5 = Euro 2-Rows Compatible

A = Reserved

B = Reserved

(5) 

Centering Guide Chip Type

0 = 66mm

1 = Reserve

2 = 72mm

3 - 9 = Reserved

(6)

Optional Coating 

0 = None (Standard)

1 = Coated Board 

2 - 9 = Reserved

(7)

Interface

0 = None (Standard)

1 = Standard Harness

2 = USB Interface Harness

3 - 9 = Reserved

Table 3 

DBV-400 Software Number Specifications

N

o

Software: DBV-400 * * * - 0 * * - V * .**

          N

o

             

(A)         (B)         (C)          (D)

(A) Software Model Name
(B)  Denomination (Country Code)

*

*. The Country Code is indicated following the ISO 3166 Standard.

(C) Interface Protocol Name
(D) Software Version

          Type 1             Type 2              Type 3

Figure 2 

Precautionary Symbols

Содержание DBV Series



















































Отзывы: