jcb JCB-MS-305SB-L, Инструкции и руководство пользователя

Страница: 14 / 29

14
JCB-MS-305SB-L
Instruction & User Manual
OPERATING INSTRUCTIONS
Intended Use
The drag, crosscut and mitre saw is designed
to crosscut wood and plastic respective of the
machine’s size. The saw is not designed for
cutting firewood.
The equipment is to be used only for its
prescribed purpose. Any other use is deemed
to be a case of misuse. The user / operator
and not the manufacturer will be liable for any
damage or injuries of any kind caused as a
result of this.
The equipment is to be operated only with
suitable saw blades. It is prohibited to use any
type of cutting-off wheel.
To use the equipment properly you must also
observe the safety information, the assembly
instructions and the operating instructions to be
found in this manual.
All persons who use and service the equipment
have to be acquainted with this manual and
must be informed about the equipment’s
potential hazards. It is also imperative to
observe the accident prevention regulations in
force in your area. The same applies for the
general rules of health and safety at work.
The manufacturer will not be liable for any
changes made to the equipment nor for any
damage resulting from such changes. Even
when the equipment is used as prescribed it
is still impossible to eliminate certain residual
risk factors. The following hazards may arise
in connection with the machine’s construction
and design:
• Contact with the saw blade in the uncovered
saw zone.
• Reaching into the running saw blade (cut
injuries).
• Kick-back of workpieces and parts of
workpieces.
• Saw blade fracturing.
• Catapulting of faulty carbide tips from the
saw blade.
• Damage to hearing if ear-defenders are not
used as necessary.
• Harmful emissions of wood or plastic dust
when used in closed rooms.
Do not use the saw to cut materials other
than those specified described in manual.
WARNING!
The supplied saw blade is only intended for
the sawing of wood! Do not use this blade
for the sawing of plastic!
WARNING!