jcb JCB-MS-305SB-L, Инструкции и руководство пользователя

Страница: 16 / 29

16
JCB-MS-305SB-L
Instruction & User Manual
Assembling the saw (Fig1/2/3/4)
• In order to adjust the turn table (26) loosen
the locking handle (8) approx. 2 turns and lift
up the release lever (9).
• Turn the turn table (26) to the desired angle
measurement on the mitre scale (27) and
secure with the locking handle (8).
• Pressing the switch handle (1) lightly
downwards and releasing the lock down pin
(22) from the motor bracket at the same
time disengages the saw from the lowest
position.
• Swing the motor (20) up.
• It is possible to secure the clamping device
(31) to the left or right on the base (6). Insert
the clamping device (31) in the hole on the
rear side of the upper fence (14) and secure
it with the star grip screw (31a).
• Attach the workpiece supports (32) to the
base (6) as shown in Figure 4 and fasten with
the screw (33).
• It is possible to tilt the motor (20) a max. 45°
to the left or right by loosening the bevel lock
knob (24).
For your own safety, only insert the mains plug
in an outlet when all assembly steps have been
completed and you have read and understood
the safety and operating instructions.
Lift the saw out of the packaging and place it on
your work bench. (Positioning of the saw on
the work bench - see the previous page under
“Before starting the equipment”)
WARNING!
ASSEMBLY AND
OPERATION
Fig.1
Fig.2
1
Fig.3
Fig.4
8
9
15
1
22
31a
31
14
26 27
8
9
16
32
33