![background image](http://html1.mh-extra.com/html/jcb/groundhog-6x4/groundhog-6x4_service-manual_3551886055.webp)
Section 3 - Maintenance
Routine Maintenance
Greasing
3-13
3-13
9803/9390-2
Greasing
Read and understand Lubricants - Health and Safety,
before greasing. You must grease the machine regularly to
keep it working efficiently. Regular greasing will also
lengthen the machine's working life. For the recommended
frequencies
Note: If working in extremely wet, muddy or dusty
conditions the fittings must be greased more often.
Note: The machine must always be greased after
pressure-washing or steam cleaning.
Greasing should be done with a grease gun. Normally, two
strokes of the gun should be enough. Stop greasing when
fresh grease appears at the joint. Use only JCB HP
Grease.
Before greasing, do the following:
1
Park the machine on firm, level ground and stop the
engine. If the vehicle has a manually operated load
bay, remove the starter key.
2
Raise the load bay. If your vehicle has an electric
tipper, ensure that the starter key is removed
Mid Axle Drive Couplings
(one on each coupling)
Fig 2.
Front Axle Trunnions
Grease points
(one on each swivel pivot)
Fig 3.
A
B
Содержание Groundhog 6x4
