Jaypro Retractable Practice Cages - Installation and Operating Instructions
www.jaypro.com / (800) 243-0533 / 976 Hartford Tpke, Waterford, CT 06385 USA
SUBJECT TO CHANGES IN DESIGN AND MANUFACTURING
COPYRIGHT 2017 JAYPRO SPORTS, LLC. ALL RIGHTS RESERVED
BBC-700 REV B, RELEASED 12-29-2017
Sheet 19 of 26
ASSEMBLE THE CAGE FRAME:
1.
Protect the floor of the building by inserting wood blocks under all fame segments and
fittings. While drilling or screwing frame together, protect the floor where you are working
with a scrap piece of plywood. This will protect the floor surface should a drill accidentally
slip from it s intended direction.
2.
Assemble in final position by aligning the motor reference point to the centerline of the
cage on the ground.
3.
Assemble all segments loosely until square is established, then screw together the segments.
A:
B:
C:
D:
E:
F:
BBC-EL (QTY = 4)
BBC-T (QTY = 18)
20" INTERMEDIATE PIPE (QTY = 2)
144" OR 168" CROSSPIPE (QTY = 9)
288" END SIDE PIPE (QTY = 4)
264" MIDDLE SIDE PIPE (QTY = 2)
Figure 21: Rendering of Complete Cage Assembly
Figure 22: Rendering of Typical BBC-EL and BBC-T Assembly
END SIDE PIPE @ 288"
MIDDLE SIDE PIPE @ 264"
END SIDE PIPE @ 288"
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
A
A
A
A
C
C
D
D
D
D
D
D
D
D
D
E
E
E
E
F
F
BBC-EL
4 SELF TAPPING SCREWS
PER ELBOW (HS5144)
BBC-T
6 SELF TAPPING SCREWS
PER TEE (HS5144)
Cage is assembled with tees and elbows
screwed to pipes with self tapping screws.
Protect floor when assembling.
Assemble loosely to ensure cage is square prior
to screwing together.
Check that all burrs have been removed from
the inside of the BBC-EL and BBC-T prior to
assembly. These fittings should move freely on
the pipes.
#10 X 1" SELF TAPPING
SCREWS ORIENTED
90 DEGREES FOR EACH PIPE
SEE DETAIL 24
SEE DETAIL 24
