Jaypro Retractable Practice Cages - Installation and Operating Instructions
www.jaypro.com / (800) 243-0533 / 976 Hartford Tpke, Waterford, CT 06385 USA
SUBJECT TO CHANGES IN DESIGN AND MANUFACTURING
COPYRIGHT 2017 JAYPRO SPORTS, LLC. ALL RIGHTS RESERVED
BBC-700 REV B, RELEASED 12-29-2017
Sheet 9 of 26
INSTALL MOTOR ATTACHMENT STRUT AND MOTOR ASSEMBLY:
1. Two pieces of unistrut that is 11 c/c are attached to the beam with unistrut clamps at a location
of the first piece a minimum of 14 outside the frame perimeter away from the motor reference point.
2. Loosely assemble the motor assembly and hoist it into position.
3. Attach the motor assembly to the motor strut and establish the
drive pipe
centerline Above
Finished Floor (AFF).
IMPORTANT NOTE: Batting cage centerline will be slightly offset from drive pipe centerline. Pay
close attention to the cable wrap direction which is directly related to the winch mounting
orientation (Refer to Figure 19).
4. Secure all nuts to mount the motor to the strut.
5.
DO NOT INSTALL
the winch drive bolts to the winch at this time.
Figure 4: Locate Motor Reference Point
CAGE WIDTH
WALL TO
EDGE OF CAGE
CAGE LENGTH
WALL TO WALL
MOTOR
REFERENCE
POINT
Figure 5: Rendering of Motor Reference Point Location
