Jaypro Retractable Practice Cages - Installation and Operating Instructions
www.jaypro.com / (800) 243-0533 / 976 Hartford Tpke, Waterford, CT 06385 USA
SUBJECT TO CHANGES IN DESIGN AND MANUFACTURING
COPYRIGHT 2017 JAYPRO SPORTS, LLC. ALL RIGHTS RESERVED
BBC-700 REV B, RELEASED 12-29-2017
Sheet 18 of 26
POSITION AND SECURE THE CABLE GUIDE PAIRS AND HOIST CABLES (REFER TO FIGURE 19 & 20):
1. Each cable guide pair should be located between a drive pipe carrier and a drive pipe splice.
-
IT IS CRITICAL THAT THE GUIDES BE DIRECTLY ABOVE THE HOIST CABLE LOCATIONS.
THE FIRST GUIDE IS 2 FROM THE FRAME EDGE AND SUBSEQUENT GUIDES ARE 11 -0" C/C.
2. The cable guide pairs should be positioned to allow 2 of space between the discs.
3. The 2 space should be centered and is positioned 1 away from the nearest DPC-A.
4. Secure the cable guides to the drive pipe by tightening the 5/16" set screws against the drive pipe.
5. Pre-wrap a hoist cable with a min of 5 wraps around the drive pipe and pass the top end of the
cable through the hole in one side of the cable guide pair. Outside the 2 opening the cable
should be secured to itself with the use of a cable clamp making a loop in the cable.
6. The cable clamp should be brought tight against the disc and all slack removed from the cable
wraps on the drive pipe.
7. Align all the wraps together against the disc creating neat rows of cable.
8. Secure these rows to the drive pipe by placing duct tape over the rows to prevent them from moving.
9. Allow the remaining length of cable to drop to the floor for installation to the frame at a later time.
Figure 20: Rendering of Complete DPC-A, Cable Guide, and Splice Assembly
Figure 19: Rendering of Proper Cable Wrapping in Relation to Winch Rotation
DRIVE PIPE CARRIER
ASSEMBLY (DPC-A)
1/8" HOIST CABLE
(RC5017)
DUAL 1/8" CABLE
CLAMPS (HM403)
CABLE GUIDE
HALVES (CG-6)
3/8-16 X 3" HEX BOLT (HS292)
&
3/8-16 NYLON LOCK NUT (HN265)
IMPORTANT: PRE-WRAP
CABLE ONTO DRIVE PIPE
(5 WRAPS MIN) & SECURE
WRAPS WITH DUCT TAPE
2"
12"
DRIVE PIPE CARRIER
12"
CABLE GUIDES
DRIVE PIPE SEGMENTS
4"
SWAGE
DRIVE PIPE
SPLICE
MOTOR LEFT
CAPACITORS UP
MOTOR LEFT
CAPACITORS DOWN
MOTOR RIGHT
CAPACITORS UP
MOTOR RIGHT
CAPACITORS DOWN
CAPACITORS
MOTOR
