![background image](http://html1.mh-extra.com/html/jayco/seneca/seneca_owners-manual_3687440076.webp)
SECTION 9
CAMPING & OPERATING
To level the motor home, please follow the
leveling jack operating instructions in
Sec. 4,
Vehicle Operation .
Refer also to the
leveling jack manufacturer’s information
contained in your Warranty Packet.
H
IDE
-A-B
ED
(
IF SO EQUIPPED
)
The hide-a-bed sofa functions much the same
as a regular residential hide-a-bed sofa. To
make the hide-a-bed sofa into a bed, remove
the seat cushions and pull the strap located at
the front of the sofa seat bottom out towards
you firmly and gently.
To convert the hide-a-bed back into the
upright sofa position, reverse the process
(make sure to pull the seat belts out into their
usable positions). Be sure to hold the sofa
strap firmly to ensure the hide-a-bed sofa
does not suddenly drop shut. Refer to the
furniture manufacturer’s care instructions for
this product.
B
OOTH
D
INETTE
(I
F
S
O
E
QUIPPED
)
The dinette is designed to seat up to four
adults. You can access the dinette bench
storage by removing all the cushions and
lifting the bottom seat supports. If the dinette
bottom seat support is screwed shut, it is to
protect factory-installed equipment (do not
use that area for storage). To convert back to
a booth dinette, reverse the process.
The booth dinette can be converted into a
bed. To convert, remove all the cushions from
the booth dinette. Lift the tabletop, remove the
detachable table legs and place the tabletop
on the ledges provided between the booth
dinette benches.
Lay the seat back cushions against the back
of the booth dinette bench. Lay the dinette
seat bottom cushions in between the seat
back cushions. The area where the cushions
meet should be slightly raised.
Push the raised cushion ends down gently.
The cushions are designed to fit snugly.
Reverse this process when converting back to
the booth dinette.
F
REE
S
TANDING
T
ABLE AND
C
HAIRS
(I
F
S
O
E
QUIPPED
)
Two free standing chairs and two folding
chairs are included in the Free Standing
Table/chair Package (if so equipped). When
traveling in the motor home, it is
recommended the free standing dinette chairs
be fastened securely at the dinette table, and
the folding chairs be secured.
B
ED
S
TORAGE
Additional storage has been provided under
the bed. It is equipped with gas struts to
assist with easy access. To access the
storage area, grasp the end ledge at the foot
of the bed and lift carefully. To close,
carefully push down on the bed slowly easing
it to the closed position.
The bedroom electric slide room system may
be located under the bed. If so, it can be
accessed by removing the screws holding the
wooden paneling in place. Use care not to
obstruct the slide room system when using
the under bed storage area.
P
RIVACY
D
RAPE
I
NSTALLATION
Remove the privacy drape from the storage
bag, which you should find in the storage area
under the mattress platform in the bedroom.
Starting at the driver's side of the cab, attach
the black plastic hook to the loop attached to
the wall behind the driver's seat. Make sure
that the side of the drape with Velcro® is
facing the motorhome windshield.
Always use seatbelts if sitting in the hide-a-
bed while the motorhome is in transit
Before lifting, be sure there is nothing on
the bed that will restrict its movement or
add extra weight. Use caution when
opening or closing the bed to keep hands
and fingers at the end ledge provided (not
on the side or further back than necessary)
to avoid pinch points.
9 - 2
Содержание SENECA
