Jayco Embark 2022, Руководство пользователя

Страница: 46 / 165

40
Section 4: Vehicle Operation
•
ATC: Turns Automatic Traction Control On/Off.
•
STEERING WHEEL ICON: Activates/deactivates the EZ Drive
system.
• LAYERS ICON (Pages): Toggles between STANDARD, NAV
and CAMERAS screens on the dash. Tachometer/Speedometer
is STANDARD. When pressed, the Tach/Speedo display shrinks,
speedometer moves to the left side, tachometer moves to the right
side. The dash radio navigation feed ( NAV ) will now be displayed.
To cycle to the CAMERAS screen press the button again, to return
to the DIGITAL DASH screen press the button a third time.
•
HORN ICON:
Enables the vehicle Air Horn. Horns are operated by pressing the
center of the steering wheel. Air horn and electric horn will both sound.
•
HEATER ICON: Toggles outside mirror heat On/Off.
Knob Controller : To display the Cameras or the Navigation screen,
push the knob upward and the screens on the dash will change.
They will cycle through the Digital Dash, Navigation screen, and
the outside Cameras. Each time you push the knob upward it will
change the screen on the dash. Pushing it upward (3) times will
return to the Digital Dash screen.
NOTE: The parking brake must be released in order to view the
NAV screen. If parking brake is set, only the STANDARD screen will be
displayed.
NOTE: The NAV screen on the digital dash is a duplication of the radio
screen, located to the right of the steering wheel. Press the NAVI button
on the radio screen to get the GPS map to appear. Menu selections and
operations are performed on the radio screen. Zooming feature is done
using the VDC controller knob. Find ZOOM in the settings menu in the
lower left corner, then select ZOOM IN or OUT by pressing the knob.
Table of Contents Maintenance Record