![background image](http://html1.mh-extra.com/html/jayco/embark-2022/embark-2022_owners-manual_3570511136.webp)
130
Section 11: Electronics
Emergency Power Off
The antenna comes with an emergency power off feature. To activate it, press and hold
“POWER” and then press “SELECT” while still holding “POWER”. The antenna will stop
and turn off. If the emergency power off feature is used, the antenna may not be in a safe
position for travel. Do not move the vehicle until the unit is stowed.
Automatic HDTV Antenna (if so equipped)
Your recreation vehicle is equipped with an exterior
automatic aiming
fixed height
high definition TV
antenna. This antenna automatically rotates 360°
and is capable of receiving any Over-The-Air (OTA)
high definition television signals being broadcast in
your receiving area (UHF & VHF). The antenna is
controlled through the use of a control plate located
inside the RV above the entrance door.
Refer to the HDTV manufacturer’s manual for detailed operating and safety information.
You can download the Winegard TV Signal Finder app for your IPhone or Android
device from either Google Play Store or Apple App Store. This app will show you all
TV signals in your area and the direction to point your antenna to receive the OTA
signals. It covers signal area up to 70 miles and gives names and channel numbers for
the stations.
Automatic HDTV Antenna
Quick start guide – Typical use:
1. Power on the antenna by pressing the
ON/OFF
button
(B
).
2. Press the
SEARCH
button to initiate a search. Within 2-3 minutes, the antenna will
point where maximum reception is found (
G
).
3. Program the TV Channels:
•
Go to Channel Setup on your TV menu.
•
Select the Over-The-Air (OTA) antenna.
•
Do not select Cable.
•
Select Channel Search or
Channel Scan
. This will program the
stations in your area into the TV. Do this whenever the antenna is
re-positioned.
NOTE:
The antenna is a fixed height (7” tall and 15.5” in diameter) and
cannot be lowered or raised. Trees and foliage will interfere with receiving
a strong HDTV signal.
Antenna Power
Supply
NOTE:
A channel scan must be run to search for and tune in local TV
channels. This feature is built into each TV and is not the same as press-
ing the channel up/down button on the TV remote control. Your TV manual
will explain how to perform a channel scan.
Table of Contents
Maintenance Record
Содержание Embark 2022
