Jay-Lor 5050 Скачать руководство пользователя страница 30

Страница: 30 / 71

AAA-055-00297 R2

5050 & 5100 OWNER MANUAL

P a g e

10.8 5100 Trailer Mixer Components

Figure 26 - 5100 Trailer Mixer Components

1. Mixer Drum

– Contains the feed while it is

cut and mixed by the vertical auger.

2. Vertical Auger

– Mixes the feed within the

mixer drum and discharges the feed through
the unloading door.

3. Auger Knives

– Cut the feed material as the

auger rotates.

4. Battery

– Provides power to the electric

engine starter, electronic scale system,
hydraulic oil cooler fan, hydraulic valve
solenoids, and auxiliary components (if
applicable).

5. Control Pendant

– Controls door opening

and auger on/off.

6. Hydraulic Oil Reservoir/Cap

– Remove the

cap to add oil. The glass level sight on the
side of the reservoir indicates proper oil level
range.

7. Electronic Scale Indicator

– Displays the

feed weight inside the drum.

8. Unloading Door

– Can be opened to

discharge the feed.

9. Adjustable Clevis Trailer Coupler

– Will couple

to a standard Class I or Class II drawbar
(standard 2-inch trailer ball hitch is also
included).

10. Trailer Jack

– Raises and lowers the height of

the trailer tongue and coupler.

11. Fuel Tank/Cap

– Remove the cap to add fuel.

12. Engine Start Key

– starts the engine.

13. Engine Oil Dipstick

– indicates the proper oil

level range.

14. Engine Choke

– Used to restrict air flow while

starting the engine.

15. Engine Throttle Control

– To increase engine

speed, push the throttle lever upward; to
decrease engine speed, push the throttle lever
downward.

16. Hydraulic Oil Cooler Fan Override

– Normally,

the fan is activated by an internal temperature
switch. However, while the override button is
pressed in the fan will run (with engine on). Test
daily before feeding to make sure cooler fan is
functioning.

Содержание 5050








































































Результаты поиска

Содержание 5050

Отзывы:

Бренды по названию

Популярные бренды

Jay-Lor 5050, Руководство пользователя

Результаты поиска

Содержание 5050

Отзывы:

Бренды по названию

Популярные бренды