Jay electronique Orion, Инструкция по установке и эксплуатации для пользователя

Страница: 89 / 176

- 89 -
Orion
- 324501G
DE FR EN
After you have chosen an identity code (8-cursor DIP_switch)
and possibly an identity code group for the OREV transmitter, the
transmitter / receivers are successively associated for each receiver
(see next page).
ASSOCIATION METHOD AND PROCEDURE :
1
ORRS and ORRA receivers : Switch off the receiver
ORRD receiver : the receiver can remain powered up throughout the procedure
2
ORRS and ORRA receivers : install the jumpers and to con fi gure
the settings.
ORRD receiver : set the microswitches and to the «ON» position
R2 R3 R4
V1 V2 V3
JP1
JP2
JP3
V1 V2 V3
JP1
JP2
JP3
JP2
JP4
V1 V3 V2
JP3
ON OFF
JP1
ORRS ORRA ORRD
3
ORRS and ORRA receivers : Switch on the receiver
ORRD receiver : go to the next step
4
-
V2
and
V3
ORRA
ORRS ORRD
LEDs are blinking.
- The receiver waits for an identity code reception (pressure on a transmitter
function button) to auto-con
fi gure its relays.
5
Press Bx then press the « On/Off » button (for the Rx association) or on the «
On/Off » button only (for R0 association), then release the buttons.
x
= 1 to 12
6
Press on one transmitter button (anyone) and maintain button pressed to
associate transmitter with the receiver, until receiver LEDs
V2
and
V3
ORRA
ORRS ORRD
go off.
The receiver has received the command to assign the buttons and identity code
of the transmitter to the function relays.
7
ORRS and ORRA receivers : switch off the receiver and remove the
and jumpers.
ORRD receiver : set the and microswitches to the «OFF» position
8
Repeat the association procedure for each receiver to be associated