Jay electronique Orion, Инструкция по установке и эксплуатации для пользователя

Страница: 80 / 176

- 80 -
Orion
- 324501G
FR DE EN
7.3- «Standard» Transmitter / Receiver association
This procedure is used to :
 Automatically erase the previous settings in the receiver,

Store, in the receiver, the new identity code programmed on
the transmitter,
 Programm the receiver on the transmitter radio channel,
 Perform a standard association of the transmitter buttons
with the receiver relays as follows :
Button n°1 of the transmitter allocated to the relay n°1 of the receiver,
Button n°2 of the transmitter allocated to the relay n°2 of the receiver,
Button n°3 of the transmitter allocated to the relay n°3 of the receiver
etc...
This programming procedure erases all the button/
relay associations, interlock functions, relay
operating modes of the previously programmed
relays and radio channel setting.
It is possible that the receiver is associated with an
unwanted transmitter.
During all the duration of the association procedure,
it is recommended not ot used any other Orion
transmitter.