JAWA 250 TRAVEL, Руководство по эксплуатации

Страница: 13 / 23

13
2 LUBRICATION
Changing engine oil
This is to be done after the first 500 km, and thereafter every 9,000 km.
Procedure: 1) warm up the engine to operating temperature
2) Unscrew the dipstick (filler)
3) Unscrew drain plug at the bottom of the engine number with a 17mm spanner
while cleaning coarse oil filter (see Figure 4)
4) after draining used oil, refit the drain plug and pour in 1.6 litres of motor oil
CAUTION:
This engine has a common oil filling for the engine and gearbox.
Cleaning of the coarse filter must be made at each oil change.
Recommended oil - Shell HELIX SUPER 15W-40 - or you may use oil from other manufacturers with
comparable values.
Change oil in front forks
Total oil capacity of the two shock absorbers is 400cc of oil, ie. 200cc in each leg. Apart from
damping, the oil serves for lubricating bushings and sliders.
Before the first oil change, we recommend that the front forks be cleaned out with two changes of
flushing oil.
a) First oil change after the first 500 km
b)
Regular oil changes thereafter at every 5,000 km.
Procedure for an oil change in front forks
see section on Dismantling the front wheel.
Place an oil drain tray under the forks.
Remove the drain plug (see Figure 15, Figure 18).
Remove the upper filler screw.
After the old oil has drained, clean the forks out with flushing oil.
Check the soundness of the sealing washers of the drain plug and the upper threaded caps.
Fill both forks with fork oil.
Refit fork top upper threaded caps.
Lubrication and chain tensioning
see Adjustment