User manual for Javo Plus M2.0
Version 22300779
page 4 / 27
1.
Technical specifications and tolerances
This machine is intended only for automatically filling pots with substrate. A hole is then drilled in the substrate,
ready to receive a plant on the take-off conveyor. This machine is intended only for the processing of pots,
substrates and other materials specified in this manual. The machine's function is explained in the “Operating
principle” Section.
This machine may be used only within the specifications and tolerances laid down in the order, assembly
drawing and this manual. Nobels BV cannot accept any responsibility for this machine when it is used outside
these limits.
This machine is intended only for products as agreed in the order confirmation. To guarantee the correct
functioning of this machine, only products within the specifications and tolerances as laid down in the order
confirmation may be used.
Do not use this machine for purposes other than those for which Nobels BV designed the machine. Use for other
purposes may result in damage and in hazards to the operator and the operator's surroundings.
This machine bears CE marking. When several machines are installed in one production line then the entire
production line must bear appropriate CE marking before this machine may be commissioned. This machine
may not be commissioned until CE marking has been applied to the production line.
Specifications
Power supply
400 Volt 50Hz 3~+N+ PE / 220 Volt 60Hz (or in consultation)
Connection to power supply
16A 5 pole
Power consumption
5.5kW
Switched plug box
1x 16A 5 pole
Weight
Approx. 1750 kg
Height of take-off conveyor
805 mm
Max. speed
3100 pots per hour (50Hz)
Min. speed
1240 pots per hour (15 Hz)
Minimum pot diameter
10 cm
Maximum pot diameter
32 cm (10 liters)
Number of potholders
16
Volume of soil bin
1100 liter (1.1 m³)
Drill holder (Motor shaft 19 mm)
Drill shaft 14 mm (through 15 cm drill)
Operating the machine
Separate control unit with stop/start/emergency stop/reset
Elevator frequency controller
Standard (controls on electrical cabinet)
Pot track frequency controller
Standard (controls on electrical cabinet)
Wheels
Heavy-duty bearing wheels at front, castors at back
Cuttings plate
Standard adjustable in height
Circulation rail
Edging and rail at each position removable. Rail divisible
Year of manufacture
See type plate.
Type of product
As agreed in the order confirmation
Compressed air (optional)
6 Bar; 250 nl/min.
1.1.
Type plate
The type plate is mounted on the switchbox door
