TRIUMPH-2 START GUIDE
10
MANAGING AND OPERATING THE RECEIVER USING THE
ANDROID-BASED DEVICE
Connection to TRIUMPH-2
1. Run the JAVAD Post.Proc for Android ap-
plication (available at Google Play) and se-
lect the preferred connection type on the
first page. Android-based devices can be
connected to TRIUMPH-2 using:
• Bluetooth direct connection;
• WiFi (mobile access point)
• Ethernet (remote connection).
2. If the
Bluetooth connection
is select-
ed, the application starts searching for
available devices. Select TRIUMPH-2 in the
blue list (Figure 10). The Bluetooth PIN-
code will be required.
After the pairing TRIUMPH-2 will be always
in this list (till manual disconnection) with-
out new search.
3. If
WiFi connection
is selected, config-
ure your Android device as Mobile Access
Point (aka HotSpot).
Note:
This procedure may differ depend-
ing on device.
Connect to TRIUMPH-2 initially using Blue-
tooth and then tap Reconnect to WiFi but-
ton. Select the WiFi (with MobileAP) radio
button on the Connection page to try to
find TRIUMPH-2 connected via WiFi. After
that you can connect to TRIUMPH-2 by
selecting it from the green list. (Figure 11).
Login and password to access TRIUMPH-2
will be required.
4. The
Ethernet connection
requests the
manual IP address, port, and login/pass-
word setup. Tap Connect (Figure 12). You
Figure 10. Bluetooth connection to TRIUMPH-2
