Javad Maxor, Руководство пользователя

Страница: 64 / 142

2-30 Maxor User’s Manual www.javad.com
2
C O N F I G U R A T I O N
Radio Configuration
2.
Start PCView on your computer. Once a connection between the receiver
and computer has been established, change PCView to manual mode
(Figure 2-37).
Figure 2-37. File->Manual Mode
3.
Execute the following receiver commands from the Manual Mode window:
•
Command 1.
Set the internal GSM modem to OFF:
%% set,/par/modem/c/mode,off
•
Command 2.
Enter the SIM card's PIN:
%% set,/par/modem/c/pin,<wxyz>
where <wxyz> stands for a specific four-digit PIN, e.g.,
%% set,/par/modem/c/pin, 6492
•
Command 3.
Notice: Mandatory only when running the GSM modem in master
mode.
Enter the dial number, i.e. the phone number of the slave modem to be dialed in
to:
%% set,/par/modem/c/dial,<slave_mod_num>
where <slave_mod_num> stands for a specific phone number, e.g.
%% set,/par/modem/c/dial, 89028354554
•
Command 4.
Enter the 'wait on data from modem' timeout:
%% set,/par/modem/c/ rcvtimeout,5
•
Command 5.
Enter the service word repeat period:
%% set,/par/modem/c/ sndtime,2
•
Command 6.
Set the required modem mode:
%% set,/par/modem/c/ mode,master – for the receiver configured as a rover,