Javad Maxor Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 142

background image

www.javad.com

Maxor User’s Manual

XV

P R E F A C E

Terms and Conditions

Conditions in this Manual and an agreement to abide by these Terms and
Conditions. The user is granted a personal, non-exclusive, non-transferable
license to use such Software under the terms stated herein and in any case only
with a single Maxor or single computer. You may not assign or transfer the
Software or this license without the express written consent of JNS. This license
is effective until terminated. You may terminate the license at any time by
destroying the Software and Manual. JNS may terminate the license if you fail
to comply with any of the Terms or Conditions. You agree to destroy the
Software and manual upon termination of your use of the Maxor. All
ownership, copyright and other intellectual property rights in and to the
Software belong to JNS. If these license terms are not acceptable, return any
unused software and manual.

CONFIDENTIALITY –

This Manual, its contents and the Software

(collectively, the "Confidential Information") are the confidential and
proprietary information of JNS. You agree to treat JNS' Confidential
Information with a degree of care no less stringent that the degree of care you
would use in safeguarding your own most valuable trade secrets. Nothing in this
paragraph shall restrict you from disclosing Confidential Information to your
employees as may be necessary or appropriate to operate or care for the Maxor.
Such employees must also keep the Confidentiality Information confidential. In
the event you become legally compelled to disclose any of the Confidential
Information, you shall give JNS immediate notice so that it may seek a
protective order or other appropriate remedy.

WEBSITE; OTHER STATEMENTS –

No statement contained at the JNS

website (or any other website) or in any other advertisements or JNS literature
or made by an employee or independent contractor of JNS modifies these Terms
and Conditions (including the Software license, warranty and limitation of
liability).

SAFETY –

Improper use of the Maxor can lead to injury to persons or property

and/or malfunction of the product. The Maxor should only be repaired by
authorized JNS warranty service centers. Users should review and heed the
safety warnings in “Safety Warnings”.

«
...
15
16
17
18
19
...
»

Содержание Maxor















































































































































Отзывы:

Нет отзывов

Похожие инструкции для Maxor

Бренд: Panasonic Страницы: 10

CQCM130U - MP3 CD RECEIVER

Бренд: Panasonic Страницы: 2

CQC800U - AUTO RADIO/CD DECK

Бренд: Panasonic Страницы: 38

CQC800U - AUTO RADIO/CD DECK

Бренд: Panasonic Страницы: 24

CQC500U - CD Receiver With Changer Control

Бренд: Panasonic Страницы: 8

CQC1304U - AUTO RADIO/CD DECK

Бренд: Panasonic Страницы: 4

Бренд: Panasonic Страницы: 30

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 48

Бренд: Panasonic Страницы: 8

Бренд: Panasonic Страницы: 2

CQVX100U - Car Audio - DVD Receiver

Бренд: Panasonic Страницы: 24

CQDFX403U - AUTO RADIO/CD DECK

Бренд: Panasonic Страницы: 5

Бренд: Panasonic Страницы: 20

CQC1103U - AUTO RADIO/CD DECK

Бренд: Panasonic Страницы: 16

CQCP134U - AUTO RADIO/CD DECK

Бренд: Panasonic Страницы: 16

SH-FX60 - Wireless Audio Delivery System

Бренд: Panasonic Страницы: 4

CoreBuilder 3500

Бренд: 3Com Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды