Javad DELTAGNSS Receiver Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 92

background image

Configuration

TriPad Configuration
How to Work with DELTAD-G2/G2D

46

www.javad.com

The file name depends on both the file creation time (month and day) and additional letter suffixes
to avoid confusion between files created on the same day.

Always Append to the File parameter

If you want the new receiver data to be appended to an existing log file, enter the desired filename
in this parameter. The setting can be up to 20 characters long.

Files Creation Mode parameter

This parameter has two possible operation modes:

• Log file - If the log file radio button has been selected, pressing the FN button will result in

closing the current log file. If data logging is off, pressing FN will open a new log file.

• AFRM - If AFRM radio button has been selected, pressing FN will enable this mode. If

AFRM has been enabled, pressing FN will disable this mode.

Automatic File Rotation Mode (AFRM) parameters

JAVAD GNSS receivers are capable of automatically rotating log files. During a “file rotation”
event, the receiver closes the current file and opens a new one according to a user-defined
schedule. The Period and Phase parameters specify this schedule. File rotation launches the
moment the receiver time module Period is equal to Phase. More precisely, a new log file opens
immediately before the scheduled epoch causing data tagged with this epoch to be recorded to the
new log file.

When opening a new log file, the receiver enables the default set of messages outputted with the
default output period. Both the default set of messages and the default output period are
programmable.

• Period - specifies the time duration of each log file created in AFRM mode.

• Values are 60 to 86400 seconds. The default value is 3600 seconds.

• Phase - specifies the “phase” (constant time shift) of creating multiple log files in AFRM

mode.

• Values are 0 to 86400 seconds. The default value is zero seconds.

• Files (total) - a counter that specifies how many multiple log files must be created in

AFRM until this mode automatically turns off. This counter decrements on every file
rotation until it value becomes zero, then file rotation automatically stops. The counter
initializes with AFRM.

Note that a log file opens immediately after turning AFRM on. This startup file is not considered
a file rotation event; the AFRM counter will not decrement.

«
...
44
45
46
47
48
...
»

Содержание DELTAGNSS Receiver





























































































Отзывы:

Нет отзывов

Похожие инструкции для DELTAGNSS Receiver

Бренд: Galaxy Страницы: 12

Бренд: Galaxy Страницы: 11

Бренд: Jensen Страницы: 11

Бренд: Jensen Страницы: 24

Бренд: Jensen Страницы: 22

MP6211 - Radio / CD

Бренд: Jensen Страницы: 52

Бренд: Jensen Страницы: 2

Бренд: Jensen Страницы: 16

Бренд: Jensen Страницы: 3

Бренд: Jensen Страницы: 9

Heavy Duty JHD40BT

Бренд: Jensen Страницы: 2

Бренд: Laird Страницы: 13

Бренд: Laird Страницы: 32

Бренд: Denon Страницы: 14

FTDX5000 - SOFTWARE UPDATE INFORMATION...

Бренд: Yaesu Страницы: 10

Бренд: Teac Страницы: 20

Бренд: Audiovox Страницы: 24

Бренд: Onkyo Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды