background image

Chapter 5

55

www.javad.com

     

 

 

         

                                                                                                                           

    

  

 

R

ECEIVER

 

AND

 F

ILE

 

M

AINTENANCE

If post-processing the data after completing a measuring, the data in the receiver’s memory will
need to be downloaded to a computer.

Downloading and deleting files will also prepare the receiver’s memory for the next measuring.
Occasionally, the receiver’s NVRAM may need to be cleared to eliminate communication or
tracking problems.

As project expectations expand, the receiver’s OAF may need to be updated to provide expanded
operation and functionality. The receiver requires firmware to properly operate and provide
appropriate functionality. As JAVAD GNSS releases firmware updates, loading these updates into
the receiver will ensure that the receiver operates at its full potential.

5.1. Downloading Files to a Computer

When your measuring finishes, you can download your measuring files to a computer for storage,
post-processing, or backup. Also, the DELTA memory holds a finite amount of files and
information, so downloading the files to a computer ensures that no files are lost.

You should download files as soon as possible after collecting data at the jobsite. TriVU provides
a File Manager to download files to your computer and delete files from the receiver DELTA.

1. Connect your receiver and computer. See “Connecting the Receiver and a Computer” on

page 25 for this procedure.

Содержание DELTAGNSS Receiver





























































































Отзывы: