Javad DELTA Скачать руководство пользователя страница 87

Страница: 87 / 92

Appendix B

www.javad.com

AFETY

ARNINGS

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Clean only with a damp cloth.

• Do not block any of the ventilation openings. Install in accordance with the manufacturer's

instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Use only with a pole, cart, stand, or tripod, specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, or has been dropped.

• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,

shall be placed on the apparatus.

Содержание DELTA




























































































Результаты поиска

Содержание DELTA

Отзывы:

Похожие инструкции для DELTA

Бренды по названию

Популярные бренды

Javad DELTA, Руководство оператора

Результаты поиска

Содержание DELTA

Отзывы:

Похожие инструкции для DELTA

Бренды по названию

Популярные бренды