background image

20                                                                                                                                                                             

www.javad.com

Safety Warnings

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Clean only with a damp cloth.
Do not block any of the ventilation openings. Install 

in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, 

heat registers, stoves, or other apparatus (including am-

plifiers) that produce heat.

Protect the power cord from being walked on or 

pinched particularly at plugs, convenience receptacles, 

and the point where they exit from the apparatus.

Only  use  attachments/accessories  specified  by  the 

manufacturer.

Use only with a pole, cart, stand, or tripod, specified 

by the manufacturer, or sold with the apparatus. When 

a cart is used, use caution when moving the cart/appara-

tus combination to avoid injury from tip-over.

Unplug this apparatus during lightning storms or 

when unused for long periods of time.

Refer  all  servicing  to  qualified  service  personnel. 

Servicing is required when the apparatus has been dam-

aged in any way, such as power-supply cord or plug is 

damaged, liquid has been spilled or objects have fallen 

into the apparatus, or has been dropped.

Apparatus shall not be exposed to dripping or splash-

ing and no objects filled with liquids, shall be placed on 

the apparatus.

Storage Precautions

Always clean the instrument after use. Wipe off dust 

with a cleaning brush, then wipe off dirt with a soft 

cloth.

Store in a location with a temperature of from -40° to 

+85°C, and no exposure to direct sunlight.

Use a clean cloth, moistened with a neutral detergent 

or water, to clean the receiver. Never use an abrasive 

cleaner, ether, thinner benzene, or other solvents.

Always make sure the instrument is completely dry 

before storing. Dry the receiver with a soft, clean cloth.

General Warnings

JAVAD GNSS receivers are designed for measuring 

and measuring related uses (that is, measuring coordi-

nates, distances, angles and depths, and recording such 

measurements). This product should never be used:

•  Without the user thoroughly understanding oper-

ator’s manual.

•  After disabling safety systems or altering the 

product.

•  With unauthorized accessories.
•  Without proper safeguards at the measuring site.
•  Contrary to applicable laws, rules, and regula-

tions.

Warning: 

The DELTA receiver should never be used in dan-

gerous environments. Use in rain or snow for a limited period is 

permitted.

A single external power supply with 5 pin ODU 

connector or SAE connector is necessary to operate 

DELTA. If external power supply has only SAE con-

nector, Receiver-to-SAE power cable shall be used. The 

external power supply needs to be Listed for US and 

Certified for EU countries, it needs also to be a Limited 

Power Source and have an output rated for 4,5...35 V 

DC, not less than 2A. This may not be the same range 

as other JAVAD GNSS products with which you are 

familiar.

Warning: 

To reduce the risk of electric shock, do not perform 

any servicing other than that contained in the operating instruc-

tions unless you are qualified to do so.

Warning: 

To avoid the introduction of hazards when operating 

and installing, before connecting of the equipment to the supply, 

make sure that the supply meets local and national safety ordinanc-

es and matches the equipment’s voltage and current requirements.

Warning: 

Never attempt any maintenance or cleaning of the 

supply while plugged in. Always remove supply from AC power 

Содержание DELTA-3N























Отзывы: