background image

6                                                                                                                                                                             

www.javad.com

• Kinematic Accuracy: 

• Horizontal: 1 cm + 1 ppm * base_line_length

• Vertical: 1.5 cm + 1 ppm * base_line_length

• RTK (OTF) Accuracy: 

• Horizontal: 1 cm + 1 ppm * base_line_length

• Vertical: 1.5 cm + 1 ppm * base_line_length

• DGPS Accuracy:  < 0.25 m post processing; < 0.5 

m real-time

• Real-time heading accuracy: ~ 0.004/L [rad] RMS, 

where L is the antenna separation in [m]

• Cold/Warm Start/ Reacquisition: <35 seconds /<5 

seconds/ <1 second

Data Features

•  Up to 100 Hz update rate for real time position 

and raw data (code and carrier) 

• 10 cm code phase and 1 mm carrier phase preci-

sion

• IEEE 1588 protocol support

• Hardware Viterbi decoder

• RTCM SC104 versions 2.x and 3.x Input/Output

• NMEA 0183 versions 2.x and 3.0 Output

• BINEX Output

• Code Differential Rover

• Code Differential Base

• Geoid and Magnetic Variation models

• RAIM

• Different DATUMs support

• Output of grid coordinates

Data Storage

• Up to 16 GB of onboard non-removable memory for 

data storage

Input/Output

• Two serial RS232 ports (up to 460.8 kbps)

• Two high-speed RS232/RS422 serial ports (up to 

460.8 Kbps)

• High-speed USB 2.0 device port (480 Mbps)

• Full-duplex 10BASE-T/100BASE-TX Ethernet 

port

• CAN 2.0

• Two 1 PPS 

• Two Event Markers

• IRIG A134, A137, B124, B137

• External Reference Frequency Input/Output

• Two LEDs, two function keys (TriPad)

Power Specification

• External power input

• Power consumption: 4.5 Watt

• Input voltage: +4.5  to +35 Volts

Environmental

• Operating Temperature: -40°C to +70°C

• Storage Temperature: -45°C to +85°C

• Humidity: 95%

• High shock and vibration resistance

Physical

• Dimensions:  4.3x1.4x5.6/max 6.3 inches 

(109x35x141/ max 160 mm) with connectors

• Weight: 0.92 lbs (0.42 kg)

Figure 2. 

128.5* or 168.5*

108.6*

34.6*

Notes:

1. * REFERENCES DIMENSION.

2. Approximated assembly weight is 0.400 kg (TBD)

Dimensions in mm

Содержание DELTA-3N























Отзывы: