Configuration
TriPad Configuration
Configuring the GSM module for Internet access
59
www.javad.com
3.3. TriPad Configuration
The ALPHA’s simple user interface (TriPad) consists of two keys (Power and FN) and two LEDs
that control and display the receiver’s operation (Figure 3-19).
Figure 3-19. The ALPHA TriPad
The TriPad performs numerous functions:
• Turn the receiver on/off.
• Turn data recording on or off (FN key).
• Show the status of satellites being tracked (STAT LED).
• Show data recording status (REC LED).
• Show each time data records to internal memory (REC LED).
• Show the status of post-processing mode (static or dynamic) when performing a Post-
Processing Kinematic measuring with the help of FN key (REC LED).
You use TriVU to configure TriPad settings. Refer to the TriVU Software Manual for all possible
TriPad configurations.
1. Connect your receiver and computer. See “Connecting the Receiver and a Computer” on
page 33 for this procedure.
FN button
REC LED
ON/OFF
button
STAT LED