Configuration
Configuring the Internal GSM Module
Configuring the GSM module for Point-to-Point radio link
45
www.javad.com
Table 3-2. Receiver Parameters for the Master/Slave Tab
Figure 3-4. Master/Slave tab
3. Click Apply, and then click File
Disconnect.
4. If needed, launch TriVU and set up the receiver to run as an RTK Base station.
Parameter
Base Receiver
Rover Receiver
Dial number
Leave blank.
Enter the phone number of the base GSM modem.
Send time out
Enter a period of time in seconds in which the base/rover GSM modem will send a
service word to the rover/base GSM modem.
• This parameter is used to maintain reliable communication between a pair of
modems and avoid unnecessary modem reinitialization.
• To ensure reliable and secure modem communication, this parameter must be
larger then the period for transmitting differential corrections.