Jason InternatIonal, Inc.
8328 MacArthur Drive • North Little Rock, AR 72118 • www.jasoninternational.com
501.771.4477 • Fax: 501.771.2333 • Cust. Service: 800.255.5766
PAGE
T.21
DATE
07/09
Supercedes 06/08
Home Spa Edition Air-Whirlpool
Digital Control Keypad with Remote Control
FEATURES
KEYPAD CONTROLS
All functions of the Jason Home Spa bath can be
conveniently operated with either one of the two
Home Spa digital keypad controls which control the
operation of the three speed whirlpool pumps, the air
blower, underwater mood lights, and the jetted neck
pillows. The dual keypads are used to run individual
pumps and jetted neck pillows. The same blower and
lights are controlled from both keypads.
WHIRLPOOL ON/OFF (PUMP ICON)
To control the operation of the whirlpool pump motor,
press and hold for each setting, High, Medium, Low,
or Off. A 20 minute decreasing timer will be initiated
when the pump motor starts. Press and release the
Pump icon once to display the current pump setting.
The Pump icon lights when the water is at operating
level and the LCD displays “System Ready”. The
LCD will display “Pump Off”, “Pump High”, “Pump
Medium”, or “Pump Low” when the key is pressed.
It also toggles between Temperature (+/- 5°F) and
Timer at 5 second intervals. “Low Water” is displayed
if no water is detected. (Displays for 5 seconds.).
LED LIGHT (LIGHT ICON)
Hold the key for less than two (2) seconds to turn
the lights Off or On. Hold the key for more than two
(2) seconds to change color modes. The Light icon
should remain lit as long as the bath is connected to
a power supply. This function has a two-hour timer
and remembers the last mode. The LCD displays
“Light On” or “Light Off” while the key is pressed for
less than two (2) seconds; “Light Cycle” is displayed
if pressed for more than two (2) seconds.
JETTED NECK PILLOW (“P” ICON)
To control the operation of the jetted neck pillow,
press and hold for each setting, you can set for a
constant flow on both jets, a pulsing flow on both
jets, or a pulsing alternating flow between jets.
Press and release the Pillow icon once to display
the current pillow setting. The Pillow icon will light
whenever the pump is running. The solenoids will
open for two (2) minutes to drain during the purge
cycle countdown. The LCD will display “Pillow On”,
“Pillow Pulse1”, “Pillow Pulse2”, or “Pillow Off” while
the key is pressed.
OPTION (“O” ICON)
This key is reserved for future options.
BLOWER ON/OFF AND MODES
(BLOWER ICON)
To control the operation of the blower, simply press
and hold the key to change the setting to Constant,
Wave, Pulse, or Off. A 20 minute decreasing timer
will be initiated when the blower motor starts. Press
and release the Blower icon once to display the
current blower mode and speed. The LCD will
display “Const Air” and blower speed, “Wave Air”
and blower speed, or “Pulse Air” and blower speed,
IR FO R REM O TE
BLO W ER O N/O FF, M O DES
BLO W ER SPEEDS
JETTED NECK PILLO W
O PTIO N
P
O
LED LIG HT
JASON
W HIRLPO O L O N/O FF, SPEED CO NTRO L
SIG NATURE EDITIO N AIR-W HIRLPO O L
S Y S T E M
R E A DY
PAGE
T.21
DATE
11/07
Supercedes 07/07
