Jason International, Inc. •
501.771.4477
Page 12 of 17
Customer Service : 800.255.5766
Copyright © 2013 Jason International.
STANDARD AND PReMIeR eDITION
MICROSILK
®
-AIRMASSeUR
®
TOUCHPAD
The Jason Standard and Premier Edition MicroSilk
®
-
AirMasseur
®
touchpad is used to access all of the
functions of the MicroSilk
®
and blower controls.
NOTe: It is not recommended to operate the MicroSilk
®
system at the same time as the AirMasseur
®
system
as this could diminish the effects of the MicroSilk
®
system.
OPeRATING INSTRUCTIONS
MicroSilk
®
On/Off Icon
The MicroSilk
®
icon is used to activate the MicroSilk
®
pump and the 20-minute timer.
•
Pressing the icon the first time starts
the MicroSilk
®
unit.
•
Pressing the icon again will shut
the MicroSilk
®
unit off.
Blower On/Off and Modes Icon
The Blower icon is used to activate the blower and the
20-minute timer.
•
Pressing the icon the first time starts the blower in
the constant high speed mode.
•
Pressing the icon again begins the wave mode,
indicated by a slow flashing light.
•
Pressing the icon a third time will change the
blower to pulse mode. This is indicated by a rapid
light flash.
Blower Speeds Icon
The Blower Speeds icon is used to increase or decrease
the blower speed once the blower is On.
•
Press and hold the icon to decrease the blower
speed until the desired intensity is reached, then
release.
•
Press and hold the icon again to increase the
blower speed until the desired intensity is reached.
The blower will return to its highest speed on any mode
change.
LeD Light Icon
The LED Light icon is used to operate an LED light
(if installed)
•
Press the icon for less than two (2) seconds to
turn the lights Off or On.
•
Hold the icon for more than two (2) seconds to
change modes.
This function has a two (2) hour timer and remembers the
last mode.
Figure 12
m
MICRO-AIRMASSEUR
Blower Speeds
LED Light
AirMasseur
®
On/Off, Modes
MicroSilk™ On/Off
®
