Jasic VIPERMIG 180i, Руководство пользователя

Страница: 20 / 40

20
Continued Torch & Wire Feed Set Up for Aluminum Wire
(1 O) Fit and tighten the torch euro connection to the machine euro connector
(11) Install a U groove drive roller of the correct size for the diameter wire being used.
(12) Place aluminum wire onto spool holder. Feed the wire through and over the drive roller into the inlet guide
tube.
(13) Press and hold the inch wire button to feed the wire down the torch cable through to the torch head.
(14) (14) Fit an Aluminum contact tip of the correct size to match the diameter of the wire being used
(15) Fit the remaining front end parts to the torch neck ready for welding
(1 O)Connect the torch to the machine
tighten and secure the torch euro
connector to the machine euro
connection.
(13) Press and hold the inch wire button to feed
the wire down the torch cable through to the
torch head.
(11) Install a U groove drive roller of the correct
size for the diameter wire being used.
(14) Fit an Aluminum contact tip of the cor­
rect size to match the wire diameter being
used
(12) Place aluminum wire onto spool holder.
Feed the wire through and over the drive
roller into the inlet guide tube.
(15) Fit the nozzle to the torch neck ready for welding.