background image

18

18

PRESSURE ULCER PREVENTION WORK

A clinical assessment of the patient’s risk of developing pressure ulcers should 
be carried out. 

Aids to the assessment include the Norton scale, Braden scale and Risk 

Assessment Pressure Sore (RAPS) scale.

The assessment must be done on arrival or at the beginning of a care period, regardless 
of whether the patient is in a care facility or cared for in his or her own home. According 
to the European Pressure Ulcer Advisory Panel’s (EPUAP) international guidelines, the 
recommendation is within 8 hours. The assessment is made to identify the specific needs 
of the patient regarding pressure relief and must be conducted by staff with adequate 
knowledge and education.

Based on the patient’s assessed status, the appropriate mattress is chosen for the correct 
purpose and pressure relief needs.

Routinely change the patient’s location and position on the mattress throughout the 
care period. In addition, regularly examine the patient and check their skin condition 
and nutritional status.

All of Järven Health Care’s OptiCell mattresses have undergone pressure measurement 

testing according to SS 8760013 at Swerea IVF. 

 

The results of the pressure measurement test form the basis for the classification of the 

pressure relief properties of the mattresses.

18

Содержание OptiCell 4 PRO





















Отзывы: