Janome MC6300P, Руководство по обслуживанию

Страница: 13 / 50

11
[ To adjust ]:
1. Remove the face plate.
Check the needle drop position on the stitch
pattern ( ) and zigzag stitch ( ) with
maximum width.
2. Loosen the hexagonal socket screw (A) just
enough to turn the eccentric pin (B).
The direction of the eccentric pin (B) should be
as shown in the Fig. 1.
3. Tighten the hexagonal socket screw (A).
4. Attach the face plate.
Hole of needle plate
0.2mm or
more
0.2mm or
more
A = B
Hexagonal
socket screw (A)
Threader lever
TO ADJUST NEEDLE DROP POSITION
When the straight stitch is selected, the needle should be at the center of the hole of the needle plate.
When the maximum zigzag width is selected, the distance between the needle and the edge of the hole
of the needle plate at the right and left needle positions should be 0.2mm or more as shown in Fig. 2.
Eccentric pin (B)
Fig. 1
Fig. 2