www.janitza.de
15
Module 96-PA-RCM / 96-PA-RCM-EL
3.4 Intended use
The
modules 96-PA-RCM
and
96-PA-RCM-EL
·Are intended as plug-in modules for a basic
device (of the UMG 96-PA or UMG 96-PQ-L
device series) in switchboard cabinets and small
distribution boards. The mounting orientation is
arbitrary (please observe the usage information
associated with the basic device).
·Must only be mounted on basic devices that
are disconnected from the power supply (see
“Mounting” step).
The basic device with attached module is
not
·Intended for installation in vehicles! Use of the
basic device with module in non-stationary
equipment is considered an exceptional envi-
ronmental condition and is only permissible by
special agreement.
·Not intended for installation in environments with
harmful oils, acids, gases, vapors, dusts, radia-
tion, etc.
3.5 Overview of module functions
·3 analog inputs for:
- 2x residual-current and current measurement
with cable break detection.
- 1x temperature measurement
·I4 current measurement channel for I4 current
measurement via a current transformer (.../5 A or
.../1 A)
Communication:
·Modbus RTU protocol (RS-485 interface of the
basic device).
·Only
Module 96-PA-RCM-EL:
Ethernet interface (RJ45)
Important module performance characteristics
can be found in chap. „11. Technical data for
the module“ on page 52.
3.6 EU/UK Declaration of Conformity
Please see the EU/UK Declaration of Conformity
posted at www.janitza.de for the laws, standards
and directives applied by Janitza electronics
GmbH for the devices. The CE/UKCA conformity
marking requirements for the device arise from
the EU/UK conformity declaration and the laws,
standards and directives mentioned therein.
