Page 30
Problem
Possible Cause
Corrective Action
Salt level too high.
Too much salt has been
added to pool.
Backwash or partially drain pool and
dilute with fresh water until salinity
returns to 4,000 ppm - 4,500 ppm.
Problem
Possible Cause
Corrective Action
Salt level too low.
Not enough salt added to
pool.
Add salt to pool until salinity returns to
4,000 ppm - 4,500 ppm
(see Section 4.7.4).
Heavy rainfall diluted the pool
water.
Add salt to pool, until salinity returns
to 4,000 ppm - 4,500 ppm
(see Section 4.7.4).
Leak in pool.
Repair pool.
Problem
Possible Cause
Corrective Action
Chlorine odor.
Presence of excess
chloramines (combined
chlorine).
Manually shock the pool
(see Section 4.4).
Problem
Possible Cause
Corrective Action
Cloudy water, slimy walls of pool.
Combined algae and bacteria
growth.
Brush down the affected walls and
then manually shock the pool
(see Section 4.4).
Problem
Possible Cause
Corrective Action
Eye and/or skin irritation.
Improper water balance.
Balance the water to recommended
levels in Section 4.5.
Problem
Possible Cause
Corrective Action
Scale formation on pool equipment.
NOTE:
To clean the deposit (scale) on
the cell (see Section 6.3).
Incorrect pH causing minerals
to come out of solution.
Adjust total alkalinity to 80 - 120 ppm.
Then adjust pH to within the range
7.4 - 7.6 (see Section 4.5).
High calcium hardness.
Dilute pool with fresh water. Consult
your pool professional regarding use
of a sequestering agent.
Содержание APURE35
Страница 2: ...Page 2...
Страница 33: ...Page 33 NOTES...
Страница 34: ...Page 34 NOTES...
Страница 35: ...Page 35 NOTES...
