J&E Hall Cellar Plus 70-S1, Техническое руководство

Страница: 31 / 35

Issue: 01.07.2020 Page 31
Technical Information
Controller parameters
Label Description Range Default setting JEH Setting
Hy Differential 0.1 ~ 25°C / 1 ~ 45°F 2.0°C / 4°F 2.0°C
ot Probe calibration -9.9 ~ 9.9°C / -18 ~ 18°F 0.0 0.0
AC Anti Short Cycle Delay 0 ~ 50 minutes 1 3
CH Kind of Action (Cool / Heat) cL ~ Ht cL cL
rE Resolution (°C only): dE = decimal between -9.9 ~ 9.9°C; in = integer dE ~ in dE in
id Interval between defrost cycles 0 ~ 99 hours 8 6
Md Maximum defrost length 0 ~ 99 minutes 20 30
AU Maximum Alarm Temperature ~ 99°C / ~210°F 99°C / 99°F 99°C
AL Minimum Alarm Temperature -55°C / -67°F -55°C / -55°F -55°C
iP
Digital input polarity: oP = activated by closing the contact; cL = activated by opening the contact
cL ~ oP cL cL
iF
Digital input configuration: EA = external alarm; EA message is displayed: bA = serious alarm; CA
message is displayed: do = door switch function: dF = defrost activation: Au = not used: Hc =
inversion of the kind of action
EA / bA / do / dF / Au / db
/ Hc
EA EA
di
Digital input delay. With iF = EL or bA delay between the detection of the external alarm condition
and its signalling. With iF = do it represents the delay to activate the door open alarm
0 ~ 99 minutes 5 5
LS Minimum Set Point -55°C / -67°F -55°C / -55°F 4°C
US Maximum Set Point 99°C / 210°F 99°C / 99°F 16°C
od Output activation delay at startup 0 ~ 99 minutes 0 0
Cy Compressor on time faulty probe. Cy = 0 compressor always OFF 0 ~ 99 minutes 15 5
Cn Compressor off time faulty probe. Cn = 0 compressor always active 0 ~ 99 minutes 30 10
CF Measurement units: °C = Celsius; °F = Fahrenheit °C / °F °C °C
dY Display delay 0 ~ 15 minutes 0 0
dF
Display during defrost: rt = real temperature; it = start defrost temperature: St = SET POINT: dF =
label dF
rt / it / St / dF it it
Ad Temperature alarm delay 0 ~ 99 minutes 15 15
dA Exclusion of temperature alarm at startup 0 ~ 99 minutes 90 90
dC
Compressor and fan status when door open: no = normal; Fn = Fans OFF; cP = Compressor OFF; Fc
= Compressor and fans OFF
no / Fn / cP / Fc no no
rd
Regulation with door open: n = no regulation if door is opened; Y = when di is elapsed regulation
restarts even if door open alarm is present
n ~ Y Y Y
Pt Parameter code table Read Only - -
rL Firmware release Read Only
-
-
Parameter Menu (selected parameters)
Hidden Parameter Menu (Full list including above parameters)
Dixell XR02CX Parameters