Getting Started
XT2
User Manual
Janam Technologies LLC Version 3, April 2017
Getting Started 2—3
Glide the battery into the com-
partment, making sure not to
cover up the plastic pull tab. The
tab is used to pull the battery out
of the compartment. Firmly push
the battery into place.
Before putting the battery com-
partment cover back in place,
check for the presence and condi-
tion of the blue seal along the in-
side perimeter of the cover. If the
blue seal is damaged or missing,
replace it. Do not operate the XT2
with a missing or damaged bat-
tery compartment seal, as this
could allow liquids to enter and
damage the device.
To put the cover back on, insert
its upper part first. Then, starting
with the upper part, gently close
the cover until all of the cover
clips have snapped into place and
the cover lock is in its locked position.
Charging the XT2 battery
To charge the battery using the
DC Power Adapter Kit
:
1. Slide the appropriate US/UK/EUR adapter plug onto the AC/DC power adapter housing.
2. Insert the DC power plug into the DC power jack on the bottom of the XT2.
3. Plug in the AC/DC power supply. The XT2 LED indicator will light red while charging
and will change to green when fully charged. Use only easily accessible wall sockets
that are easily reached with the length of the supplied power cable.
To charge the battery using the (optional)
Cradle Kit
:
1. Insert the DC power plug into the DC power jack on the
cradle. Insert the XT2 into the cradle.
2. Plug in the AC/DC power supply. The XT2 LED indicator
will light red while charging and will change to green when fully
charged. Use only easily accessible wall sockets that are
easily reached with the length of the supplied power cable.
