XT2 Setup
XT2
User Manual
Janam Technologies LLC Version 3, April 2017
XT2 Setup 3—1
Removable Memory
IMPORTANT NOTE!
To avoid possible damage to microSD and/or SIM cards or the XT2 itself, ESD
(electrostatic discharge) precautions are recommended when installing or removing
microSD and/or SIM cards. Before handling, discharge any personal static electric
buildup to a point of discharge other than the device.
microSD Card
About microSD Cards
The XT2 rugged touch computer has a microSD flash memory card slot in its battery compartment
that is compatible with microSD memory storage cards with a capacity of up to 64GB (FAT32 file
format). When inserted, a microSD card provides additional memory storage that is designated by
the XT2’s File Manager tool as “MicroSD card” and by its nature is external storage. Removable
microSD memory is useful for general file storage, uploading and downloading of user data, and more.
The use of high-quality microSD cards supplied by a reputable manufacturer is recommended.
To access the microSD card slot:
Remove the battery compartment cover on the back of the unit by
sliding the spring-loaded cover lock to the left, holding it in that position,
and then gently pulling the cover up by the two tabs on the left and right
of the cover. Remove the XT2 battery by pulling on the black plastic tab
until the battery pops out.
To install the microSD card:
Locate the microSD card slot in the battery compartment. Place a
compatible microSD card with its straight edge down (towards the
bottom edge of the XT2) and its brand and capacity markings facing
toward you. Fully insert the microSD card. The XT2 will make a sound
once the card is properly inserted and recognized. DO NOT attempt to
insert the microSD card in any other orientation. Put the battery back
into its compartment and put the battery compartment cover back on.
To remove the microSD card:
Before removing a microSD card, tap Settings > System > Storage >
SD card > Remove SD card. This keeps data safe. Then remove the
battery compartment cover and remove the battery. Gently remove the
microSD card.
XT2 Setup
3