XT2 Setup
XT2
User Manual
Janam Technologies LLC Version 3, April 2017
XT2 Setup 3—2
SIM Cards
About SIM Cards
SIM (Subscriber Identity Module) cards are needed to add cellular voice and/or data communication
service to devices equipped for cellular signal functionality. SIM cards carry an identification number
unique to the owner, storing personal data, and preventing operation if
removed. SIM cards can be transferred between devices supporting the same
communications standards. SIM cards come in
standard
,
micro
, or
nano
format. Most carriers offer SIM cards in all standards, or they have cutouts for
all three sizes (the electronics and contacts are the same for all sizes).
Janam XT2 rugged touch computers equipped with optional WWAN (Wireless Wide Area Network)
cellular signal functionality include two removable SIM card slots. Neither cellular signal connectivity
for internet access nor optional 3rd party voice telephone applications can function without an
activated SIM card installed. Both XT2 SIM card slots are designed for use with
standard SIM cards
.
If a SIM card provided by your cellular carrier uses the micro or nano format, you need a (readily
available) SIM card adapter to use it in the XT2. Contact Janam or your local GSM/GPRS based carrier
for more information about SIM cards and wireless service.
To access the SIM card slots:
Remove the battery compartment cover on the back of the unit by
sliding the spring-loaded cover lock to the left, holding it in that
position, and then gently pulling the cover up by the two tabs on the
left and right of the cover. Remove the XT2 battery by pulling on the
black plastic tab until the battery pops out.
To install a SIM card:
The location of the SIM card slots in the battery compartment are
shown in the illustration to the right. Orientate a compatible SIM card
(or micro or nano SIM card in a standard SIM adapter) with its straight
edge facing into the slot and its golden contacts surface facing down.
Carefully insert the SIM card fully into slot.
NEVER attempt to insert a SIM card in any other orientation or force a
SIM card into its slot.
Once the SIM card is installed, replace the battery and carefully put
the battery compartment cover back on.
standard micro nano
USB Port
The Janam XT2 provides USB connectivity through its
Direct Sync I/O Connector
at the bottom of
the device. An optional USB Sync cable is required. Wired USB connectivity is also possible through
the optional Single Slot Cradle.
