Box contents
• Chassis made of Carbon
• PC programmable Transmitter 2,4 GHz
• Battery pack
• Brushless motor installed
• Brushless controller installed
• 4 Servos installed
• Gyro
• Main rotor head made of plastic alu installed
• Rotor blades made of GRP installed
• Alu tail unit installed
• Painted Canopy made of GRP installed
• Accessories
• Instructions
Functions
• Aileron
• Rudder
• Rotary speed
• Roll
• Pitch
Highlights:
• Paddle bar under rotor head
• Justified and testflown in Germany
• E-Mail support for transmitter
programming
• All important parts made of Alu or
Carbon
• Main frame made of buckling resistant
Carbon
• 3D setting programmed
• 120° swash plate
• Ideal for intermediate users
Technical data
Rotor Ø
~ 705 mm
Length
~ 645 mm
Height
~ 230 mm
Weight
~ 800 g RTF
Servos
3 x 9 g | 1 x 24 g
Battery
LiPo 11,1 V 2200 mAh
Motor
Brushless 380 W
No responsibility is taken for the cor
-
rectness of this information. Subject to
change without prior notice. Errors and
omissions excepted.
GB - General Information
Jamara e.K. is not liable for any damage caused to the product
itself or through this, provided this is due to improper operation or
handling errors. The Customer alone bears the full responsibility
for the proper use and handling, including without limitation, the
assembly, the charging process, the use and choice of the ope
-
ration area. Please refer to the operating and user instructions, it
contains important information and warnings.
Attention!
In some countries it is a legal requirement to carry third par-
ty indemnity insurance when operating a radio controlled
model. Please ask your local dealer, governing body or your
insurance company for details.
Attention!
Switch the transmitter on first then the model. When you
are finisished first switch off the model then the transmitter.
Disposal information
Please care for a environmental correct and legal way
of disposing the batteries and/or accus. Please, only
throw away empty accus into the collect-boxes in your
local shops or commune. (Normally discharge the ac-
cus, when the model stops running)
All parts of this model should be disposed of correctly, in
particular electronic components may be subject to local
restrictions. Your dealer will advise you.
5
GB - Certificate of Conformity
JAMARA e.K. hereby declares that the model‚ „E-Rix 450 Car-
bon Pro, No. 03 1556, No. 03 1557“ follows the appropriate and
relevant EEC Directives, in particular those listed below and that
the model has been constructed accordingly.
Please direct any queries that you may have regarding conformi
-
ty to our service department at:
Jamara e.K. | Manuel Natterer
Am Lauerbühl 5 | D-88317 Aichstetten
Tel. +49 (0) 7565/9412-0 | Fax +49 (0) 7565/9412-23
www.jamara.com | [email protected]
Further information can also be found at:
www.neuershop.jamara.com/Conformity
Relevant EC Directives:
- (R&TTE) Radio & Telecom Terminal Equipment 1999/5/EC
- (RoHS) Restriction of Hazardous Substances
2011/65/EU, 2002/95/EC
