Jamar RAC Geo II Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 60

Jamar RAC Geo II Скачать руководство пользователя страница 3

iii

Volume 2.6 August 2018

If you have any questions about the use of the RAC Geo II, please call
the following number:

1-215-361-2244

Monday — Friday, 8:00 AM to 5:00 PM Eastern time

You may also contact us by e-mail at:

[email protected]

For more information on our products, or for the latest news in product
development, visit our web site at:

www.jamartech.com

For support information specific to RAC devices, go to:

www.jamartech.com/RACSupport.html

Address any correspondence to:

J

AMAR Technologies, Inc.

1500 Industry Road, Suite C

Hatfield, PA 19440

We are pleased that you have chosen the RAC Geo II for your distance measuring
needs. We have strived to develop a unit that is easy to use and has the options that
our customers require. The RAC Geo II has undergone extensive testing to verify
the accuracy of its operations, and each unit is tested before it leaves our facility.
However, just like other complex electronic devices, problems can occur. We always
suggest that users verify the continuing accuracy of any device they use.

Should you

detect any problems with any of our products, please notify JAMAR Technologies
immediately and discontinue use of the unit until we have verified its operation.

«
1
2
3
4
5
...
»

Содержание RAC Geo II





























































Отзывы:

Нет отзывов