Jamar RAC Geo II, Руководство пользователя, Страница: 19 / 60

Chapter 3 — Start Up, Key Functions & Menu Options
3-7
Menu Functions
The Menu key allows you to select a variety of functions. After pressing the
Menu button, the Add and Sub keys can be used to scroll through the options,
which are displayed in D-2. To select an option, press the ENT (Enter) key.
Menu 1 & 2 - Calibration Procedures
Calibration is only required when using an external distance sensor. Refer to
Chapter 4,
External Distance Sensor
, for details on calibration procedures.
Menu 3 - Pre-Distance
The Pre-distance feature will allow you to enter a known distance starting
point other than zero. It could be where you left off before lunch, or just
beginning at a known station. This feature also allows you to Add or to
subtract off a distance currently on display in D-1.
Note:
The RAC must be in
Count Hold
to use Pre-Distance.
Step 1
Press the
Menu
key, the
#3
key then
the
Enter
key. At this point, the unit is
ready to have a distance entered.
Step 2
Using the numeric keys, key in the
desired distance (up to 6 digits), then
press
Enter.
Step 3
Press
Enter
to return to the initial menu
screen, then press Enter again to exit
the menu function. You are now back
in the normal mode with the distance
set to the value you entered.
Note:
If you just want to
add
to the
distance already on display in D-1, in
Step 2, rather than pressing Enter, press
the Add key. To
subtract
from the current distance, press the Sub key.
Fig. 3.6 — Enter Pre-Distance
Fig. 3.7 — Distance Entered
Fig. 3.8
Normal mode w/ Pre-distance set