JAMAR Technologies TRAX Apollyon, Руководство пользователя

Страница: 6 / 88

TRAX Apollyon User’s Manual
vi
Quick Setup Guide for the TRAX Apollyon
1. Turn the TRAX Apollyon ON by pressing the POWER button. (Make sure the
Main Power toggle is set to ON.)
2.
TAB to Utils and press the DO key once.
3.
Check the tube spacing currently set for the study (Sp:). If you are using normal
road tubes, the spacing should be set to 2.0 ft. If you are using the EZ Belt, the
spacing should be set to 0.3 ft. To change the Spacing, press DO with
Sp: flash-
ing. Otherwise, press TAB until Exit is flashing, then press DO. The default tube
spacing will remain stored in the TRAX for all future studies. You will not need to
set it again unless you are going to use a different spacing.
4.
From the Main Menu, press the DO key when Count is flashing.
5. Select the type of study you wish to do by using the TAB key and hitting DO
when your selection is flashing. The options are Basic and Volume Only.
Basic : time-stamped raw data. This study gives you the greatest flexibility and,
depending on the layout selected, can be used to get volume, class, speed and
gap information. This is the selection that is most commonly used with the
TRAX Apollyon and the one we recommend.
Volume Only : axle or divide-by-two vehicle counting. This study type can be
used if you are only interested in vehicle volumes. For Volume-Axle, each axle
is counted. For Volume-Vehicle, every two axles is counted as one (divide-
by-two technique).
6.
After selecting your type of study, you will be prompted to select a tube layout.
Refer to the descriptions on the TRAX Apollyon or to Chapter 5 for the appropriate
selection. Layouts L5, L6, L10, L11 and L12 can be used to collect data for speed,
class, gap and volume. The remaining layouts can provide only gap and volume
data. TAB to your selection and press the DO key to select it.
7.
You will then be prompted to select a site code. Press DO with Yes flashing to
enter one or press DO with No flashing to not use a site code.
8. Press DO with
Start
flashing to begin your study!