JAMAR Technologies TRAX Apollyon, Руководство пользователя

Страница: 36 / 88

TRAX Apollyon User’s Manual
2-14
START STAT
EXIT
Press DO to Start
Count Start-up Menu
The Count Start-Up menu allows
you to immediately begin a count,
or check the status of the setup.
STAT
When you select STAT from
the Count Start-up menu, you
are shown some summary in-
formation on the configuration
of the TRAX.
The first screen shows the tube
layout selection and the Dead
Time setting. Press the TAB key
to see the current date and time, as well as the Site Code. After you
have tabbed through the available screens, you will be returned to the
Count Start-up Menu.
START
When you select Start from the Count Start-up menu, the TRAX Apol-
lyon will begin recording data. You will be shown a screen that displays
the data as it is being collected. There are several screens available for
viewing while the TRAX Apollyon is collecting data. Press the TAB key
to page though the available status screens. The following are examples
of the types of screens that are available for review depending on the
study you have programmed.
Basic Data Status Screens
The top line of this screen
gives the layout that has
been selected (L6) and the
type of study being done
(Basic). The next two lines
represent the tubes that data
is being recorded on (A, B).
As the tires from an axle strike the tubes, an asterisk is recorded
in the appropriate channel. The bottom line tells you what number
count this study is (CNT:02), the percentage of memory available
(MEM:95%) and the battery voltage (3.6v).
Count Start-up Menu
L5: Two Equal Tubes
with spacing; 1 dir
DT: 35 ms
Stat Screen
L06 BASIC-DATA
A: ******
B: ******
CNT: 02 MEM:95% 3.6v
Basic Data Status Screen #1