JAMAR Technologies TRAX Apollyon, Руководство пользователя

Страница: 34 / 88

TRAX Apollyon User’s Manual
2-12
Select VOL-VEH for a divide-by two study, where every two hits is
counted as one. Select VOL-AXLE for an axle count, where every hit
is counted as one. After you select the type of study you want, you will
be taken to the tube layout selection menu, described below.
Tube Layout Selection
A screen similar to the one shown here is displayed when in the Tube
Layout Selection Menu.
The TAB key is used to move
through the layouts. A descrip-
tion of the currently flashing
layout is displayed on the bot-
tom two lines. Refer to Chapter
5
EZ Belt & Road Tube Layouts
for a more detailed description of the individual layouts.
Listed below are the types of layouts that can be used depending on the
data collection mode selected.
Volume Only
1 or 2 Road Tubes L1, L2, L3, L4
3 or 4 Road Tubes L7, L8, L9, L13, L14
Basic
1 or 2 Road Tubes L1, L2, L3, L4, L5, L6
3 or 4 Road Tubes L7, L8, L9, L10, L11, L12, L13, L14, L15
Note that only the L5, L6, L10, L11 and L12 layouts can produce
data that can be analyzed for speed and class information.
Press DO when the layout you want to use is flashing. You will then
be taken to the Site Code menu.
Site Code
The data in the TRAX Apol-
lyon includes the date and time
that the study was done, but no
direct information on where the
study was done. Use of the Site
Code is a way for you to identify the assigned count location.
YES NO EXIT
Enter Site Code
Press DO to select
L1 L2 L3 L4 L5 L6 L7
L8 L9 10 11 12 13 14
Tube Layout Selection Menu
Site Code Menu